Skip to content

For asset and machine builders

Run your parts business and your customer portal from one system.

Keep every part, revision, stock location and build in one place, and give your customers a portal to order the current revision, request a quote and follow each order.

Engineer repairing a CNC machine in a modern factory

Who it’s for

Built for the people who run your parts business.

Your engineers keep the Bill of Materials, your stores team holds the stock and your order team ships each order. These are the leaders who decide how it all works.

Aftersales and parts leaders

Aftersales, service and spare parts managers

The problem

Hours go on working out which part and which revision a customer needs.

  • Orders without the back and forth. Customers order the current revision, or ask for a quote, through their own portal.
  • One view of every order. Your team and your customer see the same order status.
  • The right documents. Bulletins and manuals reach the customers and parts they concern.
See the customer portal

Commercial leaders

Managing, commercial and service directors

The problem

Parts support should be a service customers value, not a cost the business carries.

  • Fewer repeat questions. Customers find the right part and the documents that go with it without waiting on your team.
  • Clear revisions. Engineering changes are recorded once and reflected in what customers see and order.
  • Customers you keep. Accurate information and clear orders make you easier to work with.
How parts support pays its way

The work we help with

When a parts request arrives, the answer depends on the revision.

Repeated enquiries and manual handling take time and leave room for mistakes, especially once an assembly has been revised.

01Which revision should this customer receive?

After an engineering change, old and new revisions can sit side by side on the shelf and in people’s heads. Sending the wrong one means a return, a second shipment and a customer who trusts the catalogue less.

Answered by the Bill of Materials and the customer catalogue

02Is the part in stock, and where is it?

Stock spread across warehouses, trailers and consignment sites is hard to see in one place, so orders wait while someone checks.

Answered by Inventory Manager

03Which documents should go with it?

Bulletins, manuals and service notes often sit in inboxes and shared drives. Customers ask again, or never hear about the change.

Answered by the Information Hub

04Where is my order?

When customers cannot see progress, they chase by email and phone, and your team stops to answer.

Answered by Order Manager, shared with your customer

In the product

Assembly and revision information

Keep every part, revision, stock location and build in one place, so engineering changes are clear before they reach customers.

ProductsEvery part and component in every revision, with costs, minimum and maximum stock and bin locations.
Bill of MaterialsThe current revision of every part, and everywhere it is used.
Inventory ManagerStock by location and bin, every movement, and stock reserved for open orders.
Build ManagerBuild assemblies from their components, with stock updated for both.

Engineering changes are released through your own process.

Bill of Materials · with stock

Inventory
PartDescriptionOn handReserved
RX-6Handling cellNoneNone
RA-6-00Robot arm, 6-axis21
JD-6-02J2 joint drive Rev B Rev C32
PR-110
Precision reducer, 121:1
44
SM-6-02Servo motor, 750 W52
SK-6-02Seal kit, J2122
CV-6-10Infeed conveyor20

JD-6-02 Rev C · reducer PR-110 replaces PR-108, with a new output flange and seal kit.

Reserved = stock reserved for open orders. All 4 PR-110 are reserved.

ILLUSTRATIVE PRODUCT CONCEPT · FICTIONAL DATA

For aftersales and parts leaders

Customer parts and orders

Give customers their own portal to order the current revision or ask for a quote, and follow each order with them.

Customer portalA parts catalogue built from your Bill of Materials, for orders and quote requests.
Order ManagerOne order status for your team and your customer, with packing slips and invoices produced from the order, and payment taken with the order where your set-up needs it.
Information HubBulletins, manuals, updates and upgrades, shared with the customers and part numbers they concern.

Nothing is sent automatically. Your team chooses what to share.

Safety decisions and recalls stay with your engineering and quality process.

Customer portal · Northfield Engineering

RX-6 handling cell · serial 0412

Built with J2 joint drive JD-6-02 Rev C

PR-110 Precision reducer · fits Rev C

1 per J2 joint

Request quoteAdd 1

Order 1142

Shipped

PR-110 × 1 · to Site 1 stores

Packing slipInvoice

Both produced from this order

Information Hub

For JD-6-02

Service bulletin SB-031

J2 reducer change, Rev C

Maintenance manual

Section 6: J2 joint drive

Shared with RX-6 owners

ILLUSTRATIVE PRODUCT CONCEPT · FICTIONAL DATA

For commercial leaders

Parts support that pays its way.

Agree the measures first.Compare them with today.See them on every order.

Mistakes in parts support cost money in ways a finance director recognises: a credit note, a second shipment, a customer who orders elsewhere next time. We agree the measures with you first, and compare them with how your team works today.

Parts Control works alongside your ERP and/or CMMS, and other systems including spreadsheets.

The order from the portal above, now delivered

Order 1142 · Northfield Engineering · illustrative

Delivered
PR-110Precision reducer for J2 joint drive JD-6-02Rev C · current

On time

1 day of 3

Order to delivery against an agreed SLA of 3 days

In full

1 of 1 unit

Quantity delivered matches quantity ordered

DIFOT for this order: met · delivered in full and on timeInvoice INV-0412 · from this order

Request to order

40 min

Corrections

None

Ordered through

Customer portal

ILLUSTRATIVE PRODUCT CONCEPT · FICTIONAL DATA

Orders handled

How many parts orders and quote requests your team handles, and how many arrive through the customer portal instead of by email and phone.

Time per request

How long it takes to answer a parts request, from the first question to a confirmed order.

Corrections, credit notes and re-shipments

Each wrong part or revision sent means a credit note, a second shipment and time your team doesn’t get back. We count them before and after.

Order to invoice

Order Manager produces packing slips and invoices from the order, so each order and its invoice sit together.

What could your own parts information show you?

Talk through your parts decisions with our team. Together we’ll see whether there’s a strong fit.